|
Canister Samplers
ATEC 8001
Canister Sampler
The
Model 8001 Canister Sampler is a self-contained air sampling instrument
that has been designed to collect air samples into canisters for specified periods. The flow rates into the canisters are regulated using electronic mass flow controllers. A single
board internal computer with a color touch screen display provides flexible
scheduling, error checking, and data logging capabilities. The sampler can
be configured for either sub-ambient or pressurized canister sampling as well as
simultaneous collocated sampling of canisters using
independent mass flow controllers. Mulit-port expansion units can be added
to increase the number of canister samples.
Features
·
Manual leak check procedure during setup
·
Automatic leak checks prior to the start of sampling
·
Canister
flow rate and pressure
logged during sampling
·
Canister pressure and flow monitored for
out of tolerance conditions
·
Auto zero of mass flow controllers
·
Software calibration of mass flow controllers and pressure
transducers
·
On screen Standard Operating Procedures provide step-by-step
guidance for operators during instrument setup and post sample data retrieval
·
Expansion capability of up to 16 additional
canisters
·
Duplicate sampling with independent mass flow controllers (maximum
of four independent channels)
·
Auto sense feature only uses canisters that have not been sampled
·
Sub-ambient or pressurized canister sampling
·
User selectable final canister pressure
·
¼ VGA color touch-screen with XScale RISC microprocessor
·
Optional label printer to provide QA labels for canisters
·
Data download to jump drive
·
Idle channels can be programmed while sampling
·
Programmable purge for main units and expansion units-flushes
entire sample path prior to sampling.
·
Specially designed inlet to minimize condensation in sampling
lines
·
Manual mode operation to activate all components
 Top of Page
Model 2200 Canister Air Sampler
The
ATEC Models 2200-1,
2200-12, and 2200-22 Toxic Air Sampler are self-contained air sampling instruments
that have been specifically designed to simultaneously
collect air samples into canisters. The flow rates into the canisters are regulated using electronic mass flow controllers. A single
board internal computer with a color touch screen display provides flexible
scheduling, error checking, and data logging capabilities. The sampler can
be configured for either sub-ambient or pressurized canister sampling as well as
simultaneous collocated sampling using
independent mass flow controllers. Mulit-port expansion units can be added
to provide additional canister sampling.
Features
·
Manual leak check procedure during setup
·
Automatic leak checks prior to the start of sampling
·
Canister flow
rate and pressure
logged during sampling
· Canister
pressure and flow
rate are monitored for
out of tolerance conditions
·
Auto zero of mass flow controllers
·
Software calibration of mass flow controllers and pressure
transducers
·
On screen Standard Operating Procedures provide step-by-step
guidance for operators during instrument setup and post sample data retrieval
·
Expansion capability of up to 16 cartridges or canisters
·
Duplicate sampling with independent mass flow controllers (maximum
of four independent channels)
·
Auto sense feature only uses canisters that have not been sampled
·
Sub-ambient or pressurized canister sampling
·
User selectable final canister pressure
·
¼ VGA color touch-screen with XScale RISC microprocessor
·
Optional label printer to provide QA labels
·
Data download to jump drive
·
Idle channels can be programmed while sampling
·
Programmable purge for main units and expansion units-flushes
entire sample path prior to sampling.
·
Temperature controlled ozone scrubber for carbonyl sampling
·
Specially designed inlet to minimize condensation in sampling
lines
·
Manual mode operation to activate all components
·
Hexavalent chromium (Cr6) filter upgrade
available
Top of Page
| 
